How To Turn Dirt Water Into Purely Clean Water By Using Sun, Other Heat Sources and Chemicals

Do you have  water which are dirty?, does your surrounding contains water which has mixed with other unwanted particles?. Then there are ways to make a dirty water to pure clean water.

The three ways will be explained on this post. The first one is to purify water by using filters. You can make your own filter or you can buy commercial filter, the second method is by using evaporation with any heat source that can give water vapor and the last by using special chemical designed for water purification.

Lets get start with collecting water vapor through evaporation for getting clean from dirty water. You can use the sun rays to evaporate the water.

Make sure you have the following things,

Water from the clean sources of water, do not take water which contaminated with chemical and oil because some chemicals can not be separated from water by evaporating instead they can start reacting. Then you can collect vapors with chemicals contents.

Having the plastic which will be filled with dirty water mixed with mud, sand or anything but not oil or chemicals.

Having a glass that will be placed at center of the plastic container. 

A clean white nylon that will be used to enclose the open space of the plastic, a nylon should bend downward toward the glass.

As the sun light heat the water the water vapor will start to collect on nylon due to gravity the water drops will go toward the glass.

The water entering into the glass are clean since the evaporation is evaporating only vapors hence it separates water from the observable wastes. This blog warns you again do not purify water contaminated with oil, water from toilets and the like as well as water with  chemical contents.

Another method for water purification is using filters, you can create your own water filter by doing the following procedures.

Although the filter you make by yourself always remove large particles hence you can use birch bark curled in place of bottle and cap

You can use root or nuts in place filtration materials, apart from the given methods you can purify water by leaving water to settle for hours. The segments and other dust go down and clean water will be on top. Then you can collect the clean water.

The above methods are not useful if the wastes are very small or water has the mixtures of particles and other chemical waste. therefore we can use chemicals to solve this.

You can use chlorine dioxide or iodine, these tablets for water disinfection kill bacteria but  do not kill virus and do not treat water contaminated with oil or chemical.

The most effective method is to use commercial filters. They can purify and kill smallest organism and they filter dangerous pollutant particles that contaminated with water.